RU EN

TIK-ZSK rocking machine emergency protection device

TIK-ZSK rocking machine emergency protection device

Designed for automatic monitoring of the state of the drive of a sucker rod oil pump of the "rocking machine" type and its protection against destruction in the event of an emergency.

  • simultaneous measurement of instantaneous and averaged vibration parameters in different representations (vibration acceleration, vibration velocity, vibration displacement) on two coordinate axes and three angles of inclination relative to planes X, Y, Z (in the sensor installation place);
  • processing / analysis of information, assessment of the levels of measured parameters, control of a discrete output, thanks to the controller integrated in the sensor;
  • the presence of a digital communication interface for transmitting information to the upper level, as well as for changing your own settings (response delay time, setting level);
  • can be installed on the rocking machine of all types, both domestic and imported.

Depending on the needs of the customer, the device can be completed for a fee:

  • data collection module for archiving sensor parameters and further analysis in case of abnormal situations;
  • additional RS-485 radio extender;
  • multifunctional GSM router (or data transmission over cellular networks);
  • data collection/transmission module, ncluding a data collection module, RS-485 radio extender, GSM router (used for a cluster of wells, TIK-ZSK-K version).

Additional photos

specifications

Metrological parameters

  • Measurement range of vibration velocity, mm/s
    0-100
  • Operating frequency range, Hz
    2-1000
  • Measurement range of vibration acceleration, m/s2
    0-100
  • Measurement range of the vibration displacement range, μm
    0-100
  • Angles accuracy
    ±20

Interface

  • Output signal type
    digital RS-485
    discrete output
  • Protocol
    Modbus RTU
  • Supply
    10-24V
  • Power consumption, W, not more
    1
  • Speed of the interface RS-485
    up to 1 Mbit/s

Explosion protection

  • Marking
    0Ex ia IIC T6...T2 Ga X / PO Ex ia I Ma X
    2Ex nA IIC T6...T2 Gc X

Design parameters

  • Version
    TIK-KXX connector on cable (analogue of MIL-C-5015)
  • Overall dimensions, mm
    39х54x24.5
  • Weight, kg, not more than
    0.25
  • Mounting type
    screw M6 1 pc.
  • Protection class
    IP65/IP68

Operating parameters

  • Operating temperature range, ºС
    -60...+125

Reliability parameters and manufacturer's guarantees

  • MTBF, hours, not less than
    80 000
  • Warranty service life, months
    24
  • Service life, years, not less than
    10
  • Time between verifications
    2 years
Service center