RU EN
Certificate ISO 9001

Vibration acceleration sensors

selected: 0 compare
DVA241.XXX vibration acceleration sensors with current output DVA241.XXX vibration acceleration sensors with current output

Designed for measurement of the root mean square (RMS) value of vibration acceleration in emergency protection systems (EPS);

Consist of a sealed housing, which are integrated acceleration sensor and conversion board;

Sensor versions:

  • DVA241.104 - triangular case, all-in-one cable connection, 3-screw mount;
  • DVA241.132 - triangular case, cable with 2PM connector, mount on 3 screws;
  • DVA241.164 - triangular case, TIK-KXX connector on cable, mount for 3 screws;
  • DVA241.214 - cylindrical small-sized housing, TIK-KXX connector on the body (analogue of MIL-C-5015), mounting on a stud;
  • DVA241.714 - rectangular case, TIK-KXX connector on the body (analogue of MIL-C-5015), 1 screw mount;

To install the sensor assembly DVA241.214 uses the standard stud M6x1 (M8x1/M10x1/M12x1); for the special order it is possible to supply the studs with any thread, including inch;  

DVA241.214 allows the use of cable assemblies with MIL connector from imported sensors

Output signal type – 4... 20 mA

Add to compare list
DVA244.XXX vibration acceleration sensors with digital output DVA244.XXX vibration acceleration sensors with digital output

Designed for measurement of the root mean square (RMS) value of vibration acceleration in emergency protection systems (EPS);

Consist of a sealed housing, which are integrated acceleration sensor and conversion board;

Sensor versions:

  • DVA244.104 - triangular case, all-in-one cable connection, 3-screw mount;
  • DVA244.132 - triangular case, cable with 2PM connector, mount on 3 screws;
  • DVA244.164 - triangular case, TIK-KXX connector on cable, mount for 3 screws;
  • DVA244.214 - cylindrical small-sized housing, TIK-KXX connector on the body (analogue of MIL-C-5015), mounting on a stud;
  • DVA244.714 - rectangular case, TIK-KXX connector on the body (analogue of MIL-C-5015), 1 screw mount;

To install the sensor assembly DVA244.214 uses the standard stud M6x1 (M8x1/M10x1/M12x1); for the special order it is possible to supply the studs with any thread, including inch;  

DVA244.214 allows the use of cable assemblies with MIL connector from imported sensors

Output signal type – RS-485 (Modbus RTU) or RS-485 (Modbus RTU) + discrete output

Add to compare list
DVA252.XXX vibration acceleration sensors with voltage output DVA252.XXX vibration acceleration sensors with voltage output

Designed for measurement of the root mean square (RMS) value of vibration acceleration in diagnostics systems;

Sensor versions:

  • DVA252.104 - triangular case, all-in-one cable connection, 3-screw mount;
  • DVA252.132 - triangular case, cable with 2PM connector, mount on 3 screws;
  • DVA252.164 - triangular case, TIK-KXX connector on cable, mount for 3 screws;
  • DVA252.214 - cylindrical small-sized housing, TIK-KXX connector on the body (analogue of MIL-C-5015), mounting on a stud;
  • DVA252.714 - rectangular case, TIK-KXX connector on the body (analogue of MIL-C-5015), 1 screw mount;

The sensors in the triangular case are very convenient for use in cavities and places where the cable entry from the top does not allow installation;

For installation on the sensor unit DVA252.214, a standard stud M6x1 (M8x1/M10x1/M12x1) is used; upon request, the stud can be delivered with any thread including the inch thread;

DVA252.214 allows using the cable assemblies with MIL connector from imported sensors;

Output signal type – two-wire voltage, IEPE (ICP compatible)

Add to compare list
IKV-1-1-2 type A vibration measuring channel IKV-1-1-2 type A vibration measuring channel

Designed for measurement the amplitude of vibration acceleration in diagnostics systems;

Consists of DV-1 (type 00, 02) vibration transducer, AV 112 charge amplifier and TIK-BIS.1X1 safety barrier installed in the connecting box (the box and the barrier are delivered at the request of the Customer);

DV-1 vibration transducers are supplied with anti-vibration cable

Output signal type – two-wire voltage, IEPE (ICP compatible)







Add to compare list
IKV-1-1-2 type B vibration measuring channel IKV-1-1-2 type B vibration measuring channel

Designed for measurement the amplitude of vibration acceleration in diagnostics systems;

Consists of DV-1 (type 04, 05) vibration transducer, AV 112 charge amplifier and TIK-BIS.1X1 safety barrier installed in the connecting box (the box and the barrier are delivered at the request of the Customer);

Output signal type – two-wire voltage, IEPE (ICP compatible)








Add to compare list
Service center