Secondary devices

selected: 0 compare
TIK-REG recorder TIK-REG recorder

When connecting devices to it, it collects / stores the received information and various parameters (via digital interfaces), as well as configures the operation of devices. The recorder is also capable of transmitting information to external devices using a 3G cellular network.


  • TIK-REG 021 (2 digital interface RS-485, 1 digital interface Ethernet, 1 relay output, 1 discrete input);
  • TIK-REG 121 (2 digital interface RS-485, 1 digital interface Ethernet, 1 relay output, 1 discrete input, 3G modem).


  • Built-in flash-drive up to 64 GB;
  • Relay output, discrete input;
  • Availability of digital communication channels 2xRS-485 (Modbus RTU Master / Slave) and 1xEthernet (Modbus TCP);
  • Availability of web-interface for setting up the recorder;
  • The ability to access data on a flash-drive through an FTP-server;
  • LED indication of instrument status and data transfer process;
  • The presence of a full-fledged GSM module with support for 3G networks, a slot for a SIM card and an external antenna *;
  • Connection of an external GPS module operating via the RS-485 interface (at the request of the customer);
  • Compact case.

*only for TIK-REG 121

Add to compare list
TIK-CNV converters TIK-CNV converters

Designed to measure output values from external sensors, convert the values into digital form, and transfer the received information to the external telemechanics and control system;

The main purpose of the device is to operate as part of a distributed system (consisting of the TIK-PLC 896.11 controller, several TIK-CNVs and sensors) and to implement the following functions: сsampling, time synchronization, measurement channel failure detection.

On the basis of samples, the controller can perform advanced diagnostics - construction and analysis of spectra, execution of diagnostic rules;

TIK-CNV also calculates the following parameters of the measured quantity - RMS, amplitude, magnitude (calculated for the input signal as well as for its 1 and 2 derivatives, 1 and 2 integrals), constant value.


  • RS-485 digital output (Modbus RTU protocol), with speed up to 3 Mbit/s;
  • ability to collect samples (as part of a distributed system);
  • measurement channel failure detection;
  • identical location of power supply and RS-485 contacts for all versions;
  • possibility of changing the program filters for high-pass and low-pass filters for the input signal.
Add to compare list
Service center