Wireless sensors

TIK-WSV vibration sensor

Designed to measure the root mean square value (RMS) of vibration velocity and vibration acceleration along two axes and transmit a signal to the base station wirelessly;

Consist of a sealed enclosure in which there is an integrated acceleration sensor and conversion board;

For installation on the unit, the standard stud M6 / M8 / M10 / M12 (M8x1 / M10x1.25 / M12x1) is used; for the special order it is possible to supply the studs with any thread, including inch;

Output signal type - digital (LoRaWan protocol)

• High range radio communications - up to 2 km (in dense buildings) and up to 15 km (subject to direct visibility);
• Customizable data transfer interval; extraordinary data transmission mode when the threshold level of the measured vibration is exceeded.

TIK-WST temperature sensor

Designed to measure temperature and transmit its value to the base station wirelessly;

As a sensitive element, thermal resistance converters are used;

Two options for designs - with built-in or remote converter;

Output signal type - digital (LoRaWan protocol);

• High range radio communications - up to 2 km (in dense buildings) and up to 15 km (subject to direct visibility);
• Customizable data transfer interval; extraordinary data transmission mode when the threshold level of the measured temperature is exceeded.