IKV-1-3-1 vibration measuring channel

Designed to measure the vibration displacement span in diagnostic and emergency protection systems (EPS)*;

It consists of a DS-1 (DS-2, DS-3) eddy-current transducer and AS131 converter (in the connecting box), or AS1312 converter on the connecting cable.

Application on the compressor equipment is possible;

Output signal type – 4...20 mA;

*By default, the channel is set to 40X metal

Additional photos

Reviews

Related equipment

TIK-PLC 112
controller

TIK-BIS
safety barriers

specifications

Metrological parameters

Conversion coefficient, mA/μm / Range of indications of amplitude of vibration displacement, μm

0-125, 0-250 (eddy-current transducer DS-1 (M8x1))
0-100, 0-250 (eddy-current transducer DS-1 (M10x1))
0-500, 0-1 000 (eddy-current transducer DS-2)
0-2 000 (eddy-current transducer DS-3)
Operating frequency range, Hz

2...500
Installation gap (default), mm

1.0±0.2 (eddy-current transducer DS-1 (M8x1))
1.5±0.2 (eddy-current transducer DS-1 (M10x1))
3±0.2 (eddy-current transducer DS-2)
5±0.2 (eddy-current transducer DS-3)

Interface

Output signal type

"current loop" 4...20 mA
Supply voltage range, V

10...24

Explosion protection

Kind

intrinsically safe circuit
Marking

0ExiaIICT6 (eddy-current transducer DS-1, DS-2, DS-3)
0ExiaIICT5 (connecting box)
Connection

through TIK-PLC 112 controller
through TIK-BIS safety barrier

Design parameters

Version

IKV-1-3-1 ver. A (eddy-current transducer
DS-1 (DS-2, DS-3) ver.00 or 01 (with connector),
AS131 converter, connecting box,
TIK-BIS safety barrier)

IKV-1-3-1 ver. B (eddy-current transducer
DS-1 (DS-2, DS-3) ver.02 with connector and converter
AS1312 on the cable), connecting box,
TIK-BIS safety barrier)
Overall dimensions, mm

D(6.8) L(50; 70; 90) (eddy-current transducer DS-1 (M8x1))
D(8.5) L(50; 70; 90) (eddy-current transducer DS-1 (M10x1))
D (14.5) L(50; 70; 90) (eddy-current transducer DS-2)
D (22.5) L(90) (eddy-current transducer DS-3)
98.5x27.5x59 (AS131 converter)
277x217x84 (connecting box)
Weight, kg, not more than

0.35 (eddy-current transducer DS-1)
0.4 (eddy-current transducer DS-2)
0.5 (eddy-current transducer DS-3)
0.1 (AS131/AS1312 converter)
2.5 (connecting box)
Mounting type

threaded hole M8x1 (eddy-current transducer DS-1)
threaded hole M10x1 (eddy-current transducer DS-1)
threaded hole M16x1 (eddy-current transducer DS-2)
threaded hole M24x1 (eddy-current transducer DS-3)
Protection class

IP67 (eddy-current transducer DS-1, DS-2, DS-3)
IP20 (AS131 converter)
IP66 (connecting box)

Operating parameters

Operating temperature range, ºС

-40...+135 (eddy-current transducer)
-60...+135 (eddy-current transducer, climatic version HL)
-40...+70 (AS converter)
-60...+70 (AS converter, climatic version HL)