Certificate ISO 9001

Channel vibration measuring IKV-1-4-1

Channel vibration measuring IKV-1-4-1

Designed to measure the axial shift in the emergency protection system (EPS)*;

Consists of eddy-current transducer DS-1 (DS-2, DS-3), converter AS141 (in measurement unit) or converter AS1412 on the connecting cable. If it is necessary to display the measured parameters, additional display units are supplied;

Type of output signal - 4...20 mA;

*By default, the channel is set to 40X metal

Other photos


technical characteristics

Metrological parameters

  • Range of measurement of the axial shift, mm
    0,25...2,25 (eddy-current transducer DS-1 (M8x1))
    0,25...2,75 (eddy-current transducer DS-1 (M10x1))
    0,5...5,5 (eddy-current transducer DS-2)
    5,5...9,5(1,0...9,0) (eddy-current transducer DS-3)
  • Measurement cycle time, s
    1.0* (0.0005)**
    *factory mode
    **set by

  • Installation gap (default), mm
    1,25±0,2 (eddy-current transducer DS-1 (M8x1))
    1,5±0,2 (eddy-current transducer DS-1 (M10x1))
    3,0±0,2 (eddy-current transducer DS-2)
    5,5(5)±0,2 (eddy-current transducer DS-3)
  • Electrical insulation resistance between the vibration transducer circuit and the shell, MOm, not less than


  • Output signal type
    "current loop" 4...20 mA
  • Supply voltage range, V

Explosion protection

  • Kind of intrinsically
    safe electrical circuit
  • Marking
    0ExiаIICT6 (eddy-current transducer DS-1, DS-2, DS-3)
    0ExiаIICT5 (measuring unit)
  • Connection
    via TIK-PLC 112 controller
    via safety barrier

Construction parameters

  • Execution
    IKV-1-4-1 ver. A (eddy-current transducer
    DS-1 (DS-2, DS-3) ver.00 or 01 (with connector), AS141
    converter, measuring unit, safety barrier
    TIK-BIS-52-7 (TIK-BIS-51-7, TIK-BIS-12-1))

    IKV-1-4-1 ver. B (eddy-current transducer
    DS-1 (DS-2, DS-3) ver.02 with connector and AS1412
    converter on the cable), measuring unit, safety
    barrier TIK-BIS-52-7 (TIK-BIS-51-7, TIK-BIS-12-1))

    IKV-1-4-1 ver. V (eddy-current transducer
    DS-1 (DS-2, DS-3) ver.02 with connector and AS1412 converter
    on the cable), display unit, measuring unit, safety
    barrier TIK-BIS-52-7 (TIK-BIS-51-7, TIK-BIS-12-1))
  • Overall dimensions, mm
    D(6,8) L(50; 70; 90) (eddy-current transducer DS-1)
    D(8,5) L(50; 70; 90) (eddy-current transducer DS-1)
    D (14,5) L(50; 70; 90) (eddy-current transducer DS-2)
    D (22,5) L(90) (eddy-current transducer DS-3)
    98,5х27,5х59 (AS141 converter)
    105х22,5х67 (display unit)
    277х217х84 (measuring unit, for ver.A, B)
    300х108х195 (measuring unit, for ver.V)
  • Weight, kg, not more than
    0,35 (eddy-current transducer DS-1)
    0,4 (eddy-current transducer DS-2)
    0,5 (eddy-current transducer DS-3)
    0,1 (AS141/AS1412 converter)
    0,1 (display unit)
    2,5 (measuring unit, for ver.A, B)
    3,25 (measuring unit, for ver.V)
  • Mounting type
    threaded hole M8x1 (eddy-current transducer DS-1)
    threaded hole M10x1 (eddy-current transducer DS-1)
    threaded hole M16x1 (eddy-current transducer DS-2)
    threaded hole M24x1 (eddy-current transducer DS-3)
  • Type of protection
    IP 67 (eddy-current transducer DS-1, DS-2, DS-3)
    IP 20 (AS141 converter)
    IP 20 (display unit)
    IP 66 (measuring unit)

Operational parameters

  • Operating temperature range, ºС
    -40...+135 (eddy-current transducer)
    -60...+135 (eddy-current transducer, climatic version HL)
    -40...+70 (AS converter)
    -60...+70 (AS converter, climatic version HL)

Parameters of reliability and manufacturer's warranty

  • Mean time between failures, hours, not less than
    10 000
  • Warranty period, months
  • Service life, years, not less than

We recommend you to watch

New products

Service center